IMD injection molding

IMD injection molding

IMD (Injection Moulding Decoration, In-Mould-Decoration).

IMD injection Molding labeling is different from the traditional direct screen printing, heat-shrinkable label, the non-drying label of the new label packaging form.

At the beginning of the domestic large-scale application.

IMD injection Molding labeling is mainly used for the material such as PP, PE, PET blow molding and injection molding products. Namely before blow molding, injection molding has been printed mold

Labeling in blow and injection molding cavity, when blowing, injection mold on, through the effect of high temperature and high pressure in the inside mould making mold labeling on the special product, with the bottle or plastic surface, when the mold opens, a has beautifully printed bottles or note a one-time finish.

IMD has many advantages over other decorating methods, such as painting or printing. The image is directly embedded into the product, making it more durable and resistant to wear and tear. In addition, the image is less likely to fade or peel over time. IMD also allows for more complex designs and colors to be used, as the image is printed onto a film that can be easily inserted into the mold.

IMD is commonly used in the production of consumer electronics, such as cell phone cases and computer keyboards. The process is also used in the automotive industry, where it is used to create decorative trim pieces and interior components. IMD can be used with a variety of materials, including polycarbonate, ABS, and polypropylene.

One of the key benefits of IMD is its ability to reduce production time and costs. Because the image is pre-printed onto a film, there is no need for additional painting or printing steps. This saves time and reduces the risk of errors or defects. In addition, because the image is directly embedded into the product, there is no need for additional assembly or finishing steps.

IMD-mold stick mark advantages:

1. Enhance the anti-counterfeiting function of products directly, can conform to high standard enterprise brand protection needs more.

2. Mold labeling can do laser printed, aluminum plating, such as special effects, make the product packing grade is greatly increased.

3. The form is novel and attractive, fall off not easily broken, waterproof, prevent oil, mold-proof
4. Increase the health, the safety of packaged products put an end to the secondary printing and labeling of environmental pollution.

5. The comprehensive cost significantly lower than the traditional label and direct screen printing and environmental protection.

IMD-mold stick mark application industry;

1. Beauty, hairdressing products packaging container
2. Medical and health care products packaging container
3. The food and beverage packaging container
4. Oil powder, such as liquefied products packaging containers
5. Cooking oil, soy sauce, vinegar and other spices packing container
6. Washbasin, barrel, cup, etc. The adornment of the commodity.